General information and useful tips

• Always unplug table lamps and floor lamps and switch off hanging lights before changing bulbs.
• When changing bulbs in swing arm lights, wall lights and chandeliers, always support the arm from below with one hand while replacing the bulb.
• When a newly replaced bulb does not appear to work, always check the fuse before trying another bulb.
• To clean distressed brass, gently rub with very fine wire wool. Do not use abrasives or polishes.
• All measurements displayed on this site are approximate and should be used as a guide only. If exact dimensions are required please contact our sales staff.
• Height measurements for table lamps refer to the distance from base to shade ring.
• Unless otherwise stated, height measurements for hanging lights do not include chain.
• Horizontal library lights and halogen spotlights are wired from the left-hand facing backplate.
• Table Lights and floor lamps are supplied with a standard 8ft [2.5m] of flex.
• Torpedo switches on table lights are fitted along the flex at a distance of 12" [30cm].
• If you would like to open an account with us please contact the main showroom at the Design Centre Chelsea Harbour +44 207 231 4669