FAQ

Always unplug table lamps and floor lamps and switch off hanging lights before changing bulbs.

When changing bulbs in swing arm lights, wall lights and chandeliers, always support the arm from below with one hand while replacing the bulb.

When a newly replaced bulb does not appear to work, always check the fuse before trying another bulb.

To clean distressed brass, gently rub with very fine wire wool. Do not use abrasives or polishes.

All measurements displayed on this site are approximate and should be used as a guide only. If exact dimensions are required please contact our sales staff.

Height measurements for table lamps refer to the distance from base to shade ring.

Unless otherwise stated, height measurements for hanging lights do not include chain.

Horizontal library lights and halogen spotlights are wired from the left-hand facing backplate.

Table Lights and floor lamps are supplied with a standard 8ft [2.5m] of flex.

Torpedo switches on table lights are fitted along the flex at a distance of 12″ [30cm].

If you would like to open an account with us please contact the main showroom at the Design Centre Chelsea Harbour +44 207 351 4669